အထောက်အပံ့ HL-L8360CDW
- Replace Drum
- Replace the Belt Unit
- Paper is Jammed in the Back of the Machine
- Replace Fuser
- Replace the Waste Toner Box
- Paper is Jammed Inside the Machine
- Paper is Jammed in the Paper Tray
- Paper is Jammed in the MP tray
- Replace the Toner Cartridge
- Cartridge Error
- Replace Laser
- Paper is Jammed underneath the Paper Tray
- Out of Memory / Print Data Full
- Print Unable ##
- Calibrate or Calibration Failed or Calibration.
- 2-sided Disabled
- Drum End Soon
- Belt End Soon
- WT Box End Soon
- Drum Stop
- I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- Toner Low
- Drum !
- Replace PF Kit xx
- Condensation
- Registration or Registration failed.
- Toner Error
- Tray 2 Error / Tray 3 Error / Tray 4 Error
- Size Error DX or Size Error 2-sided
- Cooling Down
- I still receive the error message "Replace Drum", "Drum End Soon", or "Drum Stop" after I replace the drum unit with a new one. Show More Show Less
- Replace Drum
- Replace the Belt Unit
- Paper is Jammed in the Back of the Machine
- Replace Fuser
- Replace the Waste Toner Box
- Paper is Jammed Inside the Machine
- Paper is Jammed in the Paper Tray
- Paper is Jammed in the MP tray
- Replace the Toner Cartridge
- Cartridge Error
- Replace Laser
- Paper is Jammed underneath the Paper Tray
- Out of Memory / Print Data Full
- Print Unable ##
- Calibrate or Calibration Failed or Calibration.
- 2-sided Disabled
- Drum End Soon
- "Offline" appears on the Status Monitor.
- I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
- Belt End Soon
- WT Box End Soon
- Drum Stop
- Toner Low
- Drum !
- Replace PF Kit xx
- Condensation
- Registration or Registration failed.
- Toner Error
- Tray 2 Error / Tray 3 Error / Tray 4 Error
- Size Error DX or Size Error 2-sided
- Cooling Down
- I still receive the error message "Replace Drum", "Drum End Soon", or "Drum Stop" after I replace the drum unit with a new one. Show More Show Less
- The error message "No machine found" appears when I installed drivers with USB connection (For Windows).
- When I run the Firmware update tool or the I-FAX install tool, the "Program failed to run" message appears on my PC screen. What do I do?
- I am using Safari in Mac OS X. When I created a CSR or a Self-signed Certificate using the IP address to configure the "Common Name" and I try to access the Print Server using Safari with SSL communication, Safari issues an alert. Show More Show Less
အခြားအမေးအဖြေများ
အမေးများသောမေးခွန်းများသို့လမ်းညွှန်ချက်