Support for PR-670E
- The bobbin thread breaks.
- Loops appear on the surface of the fabric when embroidering.
- When thread got tangled
- Although the thread is not broken, a broken thread error occurs and the machine stops.
- The upper thread does not reach the bobbin thread when embroidering begins.
- The needle threader cannot be used.
- The machine is noisy while embroidering.
- Why does the upper thread keep breaking?
- Nothing happens, even if the LCD display is pressed.
- There are needle cuts or holes in the garment. Show More Show Less
Other FAQs Category
A guide to navigating our most common questions